You can use gasoline, diesel, battery, liquefied lpg cylinders. Liquefied petroleum gas, liquid propane, is a clean fuel of choice for most applications. A large part of the facilities will be on record supplies, refueling the machine. In other cases, the facility will have the LP can be changed back when the machine needs fuel cylinders. When you change the low-pressure cylinder, in order to avoid potential serious injury, must take certain precautions.
　　1 put on a pair of safety glasses or goggles, and heavy gloves. For a forklift truck can turn off the ignition before.
　　2 Close the cylinder valve, open it, until it shut tight. Let go of hose connected to the tank, keep in mind that it will become the opposite direction, in a normal connection. Do not use these connections on the wrench or metal tools; they should be hand tightened only.
　　3 Remove the cylinder from lpg cylinders limit straps, so it can be lifted without stents. Use of car transport cylinder LP storage area. A complete cylinder air cylinder must be placed in designated areas of the air cylinder exchange.
　　4 into the frame of the new cylinder. All cylinders can be heavy. If weight than you can feel comfortable, get help. Lifting a heavy item, always use the correct lifting procedures. Security restrictions in place straps, and then checks to determine the new cylinder valve is fully closed position.
　　5 Safety tank hose connected to the new hand, will get a tight and secure seal. Slowly open the cylinder valve lpg cylinders. If you do, watch and listen to the leak. If a leak is detected, close the valve, check the hose connection. Once the stop leak, the valve can be completely open, forklift returned to service.